Vinotheque Wine Cellars Owner's Manual download pdf (Page 15)

Liquid Measuring

Thermostat System

-13-

LIQUID MEASURING THERMOSTAT

SYSTEM

Room-temperature

Water

Fill an empty bottle with room-temperature water;

then insert the probe.

To Use the thermostat:

1. Locate an empty wine bottle.

2. Fill 3/4 full with room temperature tap

water.

3. Place bottle probe securely into bottle.

4. Place bottle with probe in a central location

of your wine cellar.

Avoid pulling too much on the probe cord.

It may become disconnected resulting in

non operation of the unit.

Note: Thermostat can be set between

50°F and 76°F.

Remember: The WhisperKOOL System is

based on the temperature of the wine.

Do not be misled by thermostats reading

air temperature. The air temperature in

the cellar will be cooler than the liquid

temperature of the wine while it is coming

to optimum balanced temperature.

All WhisperKOOL units come equipped

with our Precision Digital Technology

(PDT/PDTJR) liquid temperature

measuring thermostat system. This system

incorporates the following advantages:

1. Self-Calibrating Probe: The probe

contains a sensor chip, which actually

communicates back and forth to the

thermostat. This results in a consistent

temperature setting and accuracy.

2. Built in Defrost Cycle: The unit is

designed to shut off for five minutes

every ninety minutes in order to prevent

frost build up. This allows the cooling

unit to continue to cool effectively in

demanding environments. A count down

timer is observed by depressing the

center button on the thermostat. (PDT

upgrade version only)

3. Heavy-duty Circuitry: The circuitry

within this new unit has been upgraded

to resist power surges, which play

havoc on electrical components. This

improvement will ensure years of

trouble-free use. However, for high

reliability, we still recommend that the

customer install a surge protector for

the unit itself.

4. Fahrenheit and Celsius Readout (PDT

upgrade version only): The thermostat

has the ability to produce the readout in

both Fahrenheit and Celsius for overseas

customers. The readout can be changed

by depressing both the center and right

buttons at the same time.

Measuring liquid temperature has a few

unique advantages:

1. Wine temperature is kept in a very

precise controlled environment. This

assures a consistent temperature.

2. By measuring the liquid temperature

rather than air, the unit will run less

often

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comments to this Manuals

No comments