PDT Operating Instructions
1. Wine Temperature Indicator: A red LED bar will light up when the thermostat is reading the
liquid temperature in the bottle via the probe. This will remain lit and the temperature you see
displayed is what the probe is reading.
2. LED Screen: Displays your thermostat readings.
3. Wine Temperature Reading: The temperature the water bottle is registering to the
thermostat.
4. Temperature SET Indicator: A red LED bar will light up when you are setting the
temperature.
5. Unit ON Indicator: A red LED bar will light up every time the unit turns on to run a cooling
cycle.
6. SET Button: Used to set the temperature you want the unit to maintain.
7. UP Arrow Button: Used with the SET button to set temperature higher. In addition, by
pressing and holding the button it will allow you to see the 5-minute count down.
8. DOWN Arrow Button: Used with the SET button to set temperature lower.
*Up and Down Arrow Buttons used simultaneously will change the temperature read out
from Fahrenheit to Celsius*
-12-
PDT OPERATING INSTRUCTIONS
The unit is set at 55°F at the factory. To raise or lower the set temperature, press the set
button while at the same time pressing either the arrow up or arrow down button.
Comments to this Manuals