Vinotheque Wine Cellars Owner's Manual download pdf (Page 7)

Customer Service - 1.800.343.9463 Page 4

All cabinets have leveling legs that can be adjusted up or down with a

wrench (provided with unit) as needed. There are two primary reasons for

leveling the cabinet:

— To assure that the unit stands solidly on the oor

without rocking back and forth.

— To adjust the doors and make sure they are ush with one another,

providing a tight seal.

These leveling legs are pre-adjusted at our factory, but they may need to

be tweaked to t your speci c install location. To level the unit, slowly ad-

just the legs using the wrench. Work in a clockwise motion to lengthen

the leg or a counter-clockwise motion to shorten it.

For credenza

Cabinets should start to be leveled from side to side.

Do not try to level the cabinet with a leveling device. The unit is designed to stand slightly o plumb, tilting

backward acutely so the doors will close rmly. This will compensate for the weight of the doors.

Once you have completed leveling the cabinet, check the unit to determine whether or not the doors

are ush and sealing properly.

LEVELING THE CABINET

Incorrect Correct

Cabinets need to tilt towards the back of unit to create a better seal on the door.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

Vinotheque Wine Cellars Owner's Manual Page 7